Suppress diagnostics. This should be used if ’s standard input is from a script.
-x
Prompt for an encryption key to be used in subsequent reads and writes (see the x command).
-p string
Specify a command prompt. This may be toggled on and off with the P command.
file
Specify the name of a file to read. If file is prefixed with a bang (!), then it is interpreted as a shell command. In this case, what is read is the standard output of file executed via sh(1). To read a file whose name begins with a bang, prefix the name with a backslash (\). The default filename is set to file only if it is not prefixed with a bang.
The n th, line in the buffer where n is a number in the range [0,$].
- or ^
The previous line. This is equivalent to -1 and may be repeated with cumulative effect.
-n or ^n
The n th previous line, where n is a non-negative number.
+
The next line. This is equivalent to +1 and may be repeated with cumulative effect.
+n
The n th next line, where n is a non-negative number.
, or %
The first through last lines in the buffer. This is equivalent to the address range 1,$.
;
The current through last lines in the buffer. This is equivalent to the address range .,$.
/re/
The next line containing the regular expression re. The search wraps to the beginning of the buffer and continues down to the current line, if necessary. // repeats the last search.
?re?
The previous line containing the regular expression re. The search wraps to the end of the buffer and continues up to the current line, if necessary. ?? repeats the last search.
’lc
The line previously marked by a k (mark) command, where lc is a lower case letter.
Any character c not listed below, including ‘{’, ‘}’, ‘(’, ‘)’, ‘<’ and ‘>’, matches itself.
\ c
Any backslash-escaped character c, except for ‘{’, ‘}’, ‘(’, ‘)’, ‘<’ and ‘>’, matches itself.
.
Match any single character.
[char-class]
Match any single character in char-class. To include a ‘]’ in char-class, it must be the first character. A range of characters may be specified by separating the end characters of the range with a ‘-’, e.g., ‘a-z’ specifies the lower case characters. The following literal expressions can also be used in char-class to specify sets of characters:
If ‘-’ appears as the first or last character of char-class, then it matches itself. All other characters in char-class match themselves.
Patterns in char-class of the form:
[. col-elm .] or,
[= col-elm =]
where col-elm is a collating element are interpreted according to the current locale settings (not currently supported). See regex(3) and re_format(7) for an explanation of these constructs.
[^char-class]
Match any single character, other than newline, not in char-class. Char-class is defined as above.
^
If ^ is the first character of a regular expression, then it anchors the regular expression to the beginning of a line. Otherwise, it matches itself.
$
If $ is the last character of a regular expression, it anchors the regular expression to the end of a line. Otherwise, it matches itself.
\ <
Anchor the single character regular expression or subexpression immediately following it to the beginning of a word. (This may not be available)
\ >
Anchor the single character regular expression or subexpression immediately following it to the end of a word. (This may not be available)
\ (re\)
Define a subexpression re. Subexpressions may be nested. A subsequent backreference of the form \ n, where n is a number in the range [1,9], expands to the text matched by the n th subexpression. For example, the regular expression ‘\(.*\)\1’ matches any string consisting of identical adjacent substrings. Subexpressions are ordered relative to their left delimiter.
*
Match the single character regular expression or subexpression immediately preceding it zero or more times. If * is the first character of a regular expression or subexpression, then it matches itself. The * operator sometimes yields unexpected results. For example, the regular expression ‘b*’ matches the beginning of the string ‘abbb’ (as opposed to the substring ‘bbb’), since a null match is the only left-most match.
\{n,m\} or \{n,\} or \{n\}
Match the single character regular expression or subexpression immediately preceding it at least n and at most m times. If m is omitted, then it matches at least n times. If the comma is also omitted, then it matches exactly n times.
Additional regular expression operators may be defined depending on the particular regex(3) implementation.
Append text to the buffer after the addressed line. Text is entered in input mode. The current address is set to last line entered.
(.,.)c
Change lines in the buffer. The addressed lines are deleted from the buffer, and text is appended in their place. Text is entered in input mode. The current address is set to last line entered.
(.,.)d
Delete the addressed lines from the buffer. If there is a line after the deleted range, then the current address is set to this line. Otherwise the current address is set to the line before the deleted range.
e file
Edit file, and sets the default filename. If file is not specified, then the default filename is used. Any lines in the buffer are deleted before the new file is read. The current address is set to the last line read.
e !command
Edit the standard output of !command, (see !command below). The default filename is unchanged. Any lines in the buffer are deleted before the output of command is read. The current address is set to the last line read.
E file
Edit file unconditionally. This is similar to the e command, except that unwritten changes are discarded without warning. The current address is set to the last line read.
f file
Set the default filename to file. If file is not specified, then the default unescaped filename is printed.
(1,$)g/re/command-list
Apply command-list to each of the addressed lines matching a regular expression re. The current address is set to the line currently matched before command-list is executed. At the end of the g command, the current address is set to the last line affected by command-list.
Each command in command-list must be on a separate line, and every line except for the last must be terminated by a backslash (\). Any commands are allowed, except for g, G, v, and V. A newline alone in command-list is equivalent to a p command.
(1,$)G/re/
Interactively edit the addressed lines matching a regular expression re. For each matching line, the line is printed, the current address is set, and the user is prompted to enter a command-list. At the end of the G command, the current address is set to the last line affected by (the last) command-list.
The format of command-list is the same as that of the g command. A newline alone acts as a null command list. A single ‘&’ repeats the last non-null command list.
H
Toggle the printing of error explanations. By default, explanations are not printed. It is recommended that ed scripts begin with this command to aid in debugging.
h
Print an explanation of the last error.
(.)i
Insert text in the buffer before the current line. Text is entered in input mode. The current address is set to the last line entered.
(.,.+1)j
Join the addressed lines. The addressed lines are deleted from the buffer and replaced by a single line containing their joined text. The current address is set to the resultant line.
(.)klc
Mark a line with a lower case letter lc. The line can then be addressed as ’lc (i.e., a single quote followed by lc) in subsequent commands. The mark is not cleared until the line is deleted or otherwise modified.
(.,.)l
Print the addressed lines unambiguously. If a single line fills for than one screen (as might be the case when viewing a binary file, for instance), a "--More--" prompt is printed on the last line. The ed utility waits until the RETURN key is pressed before displaying the next screen. The current address is set to the last line printed.
(.,.)m(.)
Move lines in the buffer. The addressed lines are moved to after the right-hand destination address, which may be the address 0 (zero). The current address is set to the last line moved.
(.,.)n
Print the addressed lines along with their line numbers. The current address is set to the last line printed.
(.,.)p
Print the addressed lines. The current address is set to the last line printed.
P
Toggle the command prompt on and off. Unless a prompt was specified by with command-line option -p string, the command prompt is by default turned off.
q
Quit ed.
Q
Quit ed unconditionally. This is similar to the q command, except that unwritten changes are discarded without warning.
($)r file
Read file to after the addressed line. If file is not specified, then the default filename is used. If there was no default filename prior to the command, then the default filename is set to file. Otherwise, the default filename is unchanged. The current address is set to the last line read.
($)r !command
Read to after the addressed line the standard output of !command, (see the !command below). The default filename is unchanged. The current address is set to the last line read.
Replace text in the addressed lines matching a regular expression re with replacement. By default, only the first match in each line is replaced. If the g (global) suffix is given, then every match to be replaced. The n suffix, where n is a positive number, causes only the n th match to be replaced. It is an error if no substitutions are performed on any of the addressed lines. The current address is set the last line affected.
Re and replacement may be delimited by any character other than space and newline (see the s command below). If one or two of the last delimiters is omitted, then the last line affected is printed as though the print suffix p were specified.
An unescaped ‘&’ in replacement is replaced by the currently matched text. The character sequence \m, where m is a number in the range [1,9], is replaced by the m th backreference expression of the matched text. If replacement consists of a single ‘%’, then replacement from the last substitution is used. Newlines may be embedded in replacement if they are escaped with a backslash (\).
(.,.)s
Repeat the last substitution. This form of the s command accepts a count suffix n, or any combination of the characters r, g, and p. If a count suffix n is given, then only the n th match is replaced. The r suffix causes the regular expression of the last search to be used instead of the that of the last substitution. The g suffix toggles the global suffix of the last substitution. The p suffix toggles the print suffix of the last substitution The current address is set to the last line affected.
(.,.)t(.)
Copy (i.e., transfer) the addressed lines to after the right-hand destination address, which may be the address 0 (zero). The current address is set to the last line copied.
u
Undo the last command and restores the current address to what it was before the command. The global commands g, G, v, and V. are treated as a single command by undo. u is its own inverse.
(1,$)v/re/command-list
Apply command-list to each of the addressed lines not matching a regular expression re. This is similar to the g command.
(1,$)V/re/
Interactively edit the addressed lines not matching a regular expression re. This is similar to the G command.
(1,$)w file
Write the addressed lines to file. Any previous contents of file is lost without warning. If there is no default filename, then the default filename is set to file, otherwise it is unchanged. If no filename is specified, then the default filename is used. The current address is unchanged.
(1,$)wq file
Write the addressed lines to file, and then executes a q command.
(1,$)w !command
Write the addressed lines to the standard input of !command, (see the !command below). The default filename and current address are unchanged.
(1,$)W file
Append the addressed lines to the end of file. This is similar to the w command, expect that the previous contents of file is not clobbered. The current address is unchanged.
x
Prompt for an encryption key which is used in subsequent reads and writes. If a newline alone is entered as the key, then encryption is turned off. Otherwise, echoing is disabled while a key is read. Encryption/decryption is done using the bdes(1) algorithm.
(.+1)z n
Scroll n lines at a time starting at addressed line. If n is not specified, then the current window size is used. The current address is set to the last line printed.
!command
Execute command via sh(1). If the first character of command is ‘!’, then it is replaced by text of the previous !command. The ed utility does not process command for backslash (\) escapes. However, an unescaped % is replaced by the default filename. When the shell returns from execution, a ‘!’ is printed to the standard output. The current line is unchanged.
($)=
Print the line number of the addressed line.
(.+1)newline
Print the addressed line, and sets the current address to that line.
