:man| Alphabetical   Categories   About us 
 
NG_ATMLLC (4) | Special files and drivers | Unix Manual Pages | :man▋

NAME

ng_atmllc - ATM LLC netgraph node type

CONTENTS

Synopsis
Description
Hooks
Control Messages
Shutdown
See Also
Authors

SYNOPSIS


.In netgraph/ng_atmllc.h

DESCRIPTION

The atmllc node type translates frames in to and out of ATM LLC encapsulation, as specified by RFC 1483. In LLC encapsulation the protocol of a given protocol data unit (PDU) is specified by an IEEE 802.2 LLC header, possibly followed by an IEEE 802.1a SubNetwork Attachment Point (SNAP) header. This node currently handles the Ethernet and FDDI protocols.

The node transmits and receives ATM PDUs on the atm hook. Received PDUs are decoded and forwarded to the ether or fddi hooks as appropriate. Data received on the ether or fddi hooks are assumed to be full Ethernet or FDDI packets as appropriate and are encapsulated into a PDU and transmitted via the atm hook.

HOOKS

This node type supports the following hooks:
atm ATM connection. Typically, this hook would be connected to a ng_atm(4) node, which handles transmission of ATM PDUs over an ATM device.
ether Ethernet connection. This hook sends and receives Ethernet frames. This would normally be connected to an ng_eiface(4) node if in use.
fddi FDDI connection. This hook sends and receives FDDI frames.

CONTROL MESSAGES

This node type supports the generic control messages.

SHUTDOWN

This node shuts down upon receipt of a NGM_SHUTDOWN control message, or when all hooks have been disconnected.

SEE ALSO

netgraph(4), ng_atm(4), ng_eiface(4), ngctl(8)
.Rs "Multiprotocol Encapsulation over ATM Adaptation Layer 5"
.Re

AUTHORS

 
Created by Blin Media, 2008-2013