PST (4) | Special files and drivers | Unix Manual Pages | :man▋
pst - device driver for Promise Supertrak SX6000
.Cd device pst
This driver is for the Promise Supertrak SX6000 ATA hardware RAID controller. It supports (in hardware) RAID levels 0, 1, 0+1, 3, 5 and JBOD on up to 6 ATA disk drives, including automatic rebuild and hotswap, and supports signalling disk status on LEDs on Promise Superswap disk enclosures. The Supertrak line of controllers does not support non-disk devices.
The pst driver supports the Promise Supertrak SX6000 ATA hardware RAID controller.
The pst driver does not support manipulating the RAID from the OS, RAIDs need to be set up from the onboard BIOS. However, hot swap, hot spare, and automatic rebuilds are supported without a reboot.
The pst driver first appeared in
.Fx 4.7 .
The pst driver and man page was written by
.An Sren Schmidt <sos@FreeBSD.org>.
shtml">manServer 1.07 from pst.4 using doc macros.
|December 14, 2004 ||PST (4) || |
Share this page