:man| Alphabetical   Categories   About us 
 
SBSH (4) | Special files and drivers | Unix Manual Pages | :man

NAME

sbsh - "Granch SBNI16 SHDSL modem device driver"

CONTENTS

Synopsis
Description
Files
Diagnostics
See Also
History
Authors

SYNOPSIS


.Cd "device sbsh"

DESCRIPTION

The sbsh driver provides support for an internal PCI modem SBNI16-SHDSL. A device is introduced to the OS as a common Ethernet-like network card which must be configured with ifconfig(8) (all standard network interface parameters could be set). Modem-specific parameters (master/slave mode, line rate, etc.) must be set with the sb16config utility before interface activation.

FILES

The sources for the driver reside in:

/sys/dev/sbsh/if_sbsh.c
/sys/dev/sbsh/if_sbshreg.h

DIAGNOSTICS

"sbsh%d: couldn’t map memory"
"sbsh%d: couldn’t map interrupt"
"sbsh%d: couldn’t set up irq"
A fatal initialization error has occurred.
"sbsh%d: unable to load firmware" A fatal error has occurred while sb16config was running.
"sbsh%d: firmware wasn’t loaded" "ifconfig ... up" has failed because device has not been configured with sb16config.
"sbsh%d: transmit timeout"
"sbsh%d: interrupt posted but not delivered"
Probably, a hardware error or incompatibility.
"sbsh%d: unable to get mbuf"
"sbsh%d: unable to get mbuf cluster"
The driver failed to allocate a memory buffer.

SEE ALSO

arp(4), netintro(4),


Share this page

     Follow us

Facebook Twitter Google+ LinkedIn


 
Created by Blin Media, 2008-2013