Configure OPTIONS for this port and all its dependencies using dialog(1).
fetch
Fetch all of the files needed to build this port from the sites listed in MASTER_SITES and PATCH_SITES. See FETCH_CMD, MASTER_SITE_OVERRIDE and MASTER_SITE_BACKUP.
checksum
Verify that the fetched distfile’s checksum matches the one the port was tested against. Defining NO_CHECKSUM will skip this step.
depends
Install (or compile if only compilation is necessary) any dependencies of the current port. When called by the extract or fetch targets, this is run in piecemeal as fetch-depends, build-depends, etc. Defining NO_DEPENDS will skip this step.
extract
Expand the distfile into a work directory.
patch
Apply any patches that are necessary for the port.
configure
Configure the port. Some ports will ask you questions during this stage. See INTERACTIVE and BATCH.
build
Build the port. This is the same as calling the all target.
install
Install the port and register it with the package system. This is all you really need to do.
The following targets are not run during the normal install process.
showconfig
Display OPTIONS config for this port.
showconfig-recursive
Display OPTIONS config for this port and all its dependencies.
rmconfig
Remove OPTIONS config for this port.
rmconfig-recursive
Remove OPTIONS config for this port and all its dependencies.
config-conditional
Skip the ports which have already had their OPTIONS configured.
fetch-list
Show list of files to be fetched in order to build the port.
fetch-recursive
Fetch the distfiles of the port and all its dependencies.
fetch-recursive-list
Show list of files that would be retrieved by fetch-recursive.
Print a list of all the compile and run dependencies, and dependencies of those dependencies.
clean
Remove the expanded source code. This recurses to dependencies unless NOCLEANDEPENDS is defined.
distclean
Remove the port’s distfiles and perform the clean target. The clean portion recurses to dependencies unless NOCLEANDEPENDS is defined, but the distclean portion never recurses (this is perhaps a bug).
reinstall
Use this to restore a port after using pkg_delete(1) when you should have used deinstall.
deinstall
Remove an installed port from the system, similar to pkg_delete(1).
deinstall-all
Remove all installed ports with the same PKGORIGIN from the system.
package
Make a binary package for the port. The port will be installed if it has not already been. The package is a .tbz file that you can use to install the port on other machines with pkg_add(1). If the directory specified by PACKAGES does not exist, the package will be put into the current directory. See PKGREPOSITORY and PKGFILE.
package-recursive
Like package, but makes a package for each depending port as well.
readmes
Create a port’s README.html. This can be used from /usr/ports to create a browsable web of all ports on your system!
search
Search the INDEX file for the pattern specified by the key (searches the port name, comment, and dependencies), name (searches the port name only), path (searches the port path), info (searches the port info), maint (searches the port maintainer), cat (searches the port category), bdeps (searches the port build-time dependency), rdeps (searches the port run-time dependency) make(1) variables, and their exclusion counterparts: xname, xkey etc. For example, one would type:
"cd /usr/ports && make search name=query"
to find all ports whose name matches "query". Results include the matching ports’ path, comment, maintainer, build dependencies, and run dependencies.
cd /usr/ports && make search name=pear- \
xbdeps=apache
To find all ports whose names contain "pear-" and which do not have apache listed in build-time dependencies.
cd /usr/ports && make search name=pear- \
xname=’ht(tp|ml)’
To find all ports whose names contain "pear-", but not "html" or "http".
make search key=apache display=name,path,info keylim=1
To find ports that contain "apache" in either of the name, path, info fields, ignore the rest of the record.
describe
Generate a one-line description of each port for use in the INDEX file.
index
Create /usr/ports/INDEX, which is used by the pretty-print-* and search targets. Running the index target will ensure your INDEX file is up to date with your ports tree.
Location of the ports tree. This is /usr/ports on .Fx and .Ox , and /usr/pkgsrc on .Nx .
WRKDIRPREFIX
Where to create any temporary files. Useful if PORTSDIR is read-only (perhaps mounted from a CD-ROM).
DISTDIR
Where to find/put distfiles, normally distfiles/ in PORTSDIR.
PACKAGES
Used only for the package target; the base directory for the packages tree, normally packages/ in PORTSDIR. If this directory exists, the package tree will be (partially) constructed. This directory does not have to exist; if it does not, packages will be placed into the current directory, or you can define one of
PKGREPOSITORY
Directory to put the package in.
PKGFILE
The full path to the package.
PREFIX
Where to install things in general (usually /usr/local or /usr/X11R6).
MASTER_SITES
Primary sites for distribution files if not found locally.
PATCH_SITES
Primary locations for distribution patch files if not found locally.
MASTER_SITE_FREEBSD
If set, go to the master .Fx site for all files.
MASTER_SITE_OVERRIDE
Try going to these sites for all files and patches, first.
MASTER_SITE_BACKUP
Try going to these sites for all files and patches, last.
MASTER_SITE_INDEX
Where to get INDEX source built on .Fx cluster (for fetchindex target). Defaults to http://www.FreeBSD.org/ports/.
FETCHINDEX
Command to get INDEX (for fetchindex target). Defaults to "fetch-am".
NOCLEANDEPENDS
If defined, do not let clean recurse to dependencies.
FETCH_CMD
Command to use to fetch files. Normally fetch(1).
FORCE_PKG_REGISTER
If set, overwrite any existing package registration on the system.
MOTIFLIB
Location of libXm. Brq a, so.
INTERACTIVE
If defined, only operate on a port if it requires interaction.
BATCH
If defined, only operate on a port if it can be installed 100% automatically.
OPTIONS
If defined, list of what WITH_* options this port accepts. Note: to make OPTIONS actually work, it is necessary to include bsd.port.pre.mk before starting to test the WITH_* variables.
DISABLE_VULNERABILITIES
If defined, disable check for security vulnerabilities using portaudit 1(ports/security/portaudit) when installing new ports.
